 HF16P SilverStitcher
Use a Post-type stitcher for setting up regular slotted boxes, overlap slotted boxes, full overlap boxes or half-slotted boxes with partial covers. Post-type stitchers close bottoms of slotted boxes quickly, securely . . to meet all carrier regulations. Select a model to meet your production requirements, using either narrow or wide crown stitching heads.
For production up to 3000 boxes per day, choose a regular duty Silverstitcher. These proven units let you set up as many as 350 RSC boxes per hour . . . all day long.
For greater production and longer runs, a Dual-head Silverstitcher places two stitches simultaneously . . . lets you set up as many as 600 boxes per hour. For heavy-duty work, such as stitching three pieces of single wall corrugated, two pieces of double or triple wall, or for assembly of solid fibreboard boxes, select an ISP Heavy Duty Stitcher.
| |
Model
Number |
Distance from Front of Frame to Clincher |
Distance from Top of Base to Clincher* |
Maximum Size Box Handled (Including Top Flaps) |
Approximate
Shipping
Weight
(Pounds) |
| Width |
Depth |
| Regular Duty Single Head |
HF16P
HF16AHF25P
HF25A |
16" 25" |
41 1/2" 41 1/2" |
32" 50" |
41 1/4" 40 1/2" |
515
535 |
| NOTES |
7/16" crown stitch is standard
1-1/4" crown is optional
All standard sizes of flat stitching wire can be used on these machines
* Base is approximately 4 1/4" high on HFStandard motor is 1/3 hp, 1725 RPM, single phase, 115 volt, 60 Cycle, AC. Special motors available as required.
|
|
